Abicor Binzel TIG ABITIG MT, Руководство по эксплуатации

Страница: 28 / 100

EN - 8
3 Product Description ABITIG
®
MT
work. Keep appropriate fire extinguishing equipment ready in the
workplace.
2.6 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electricity, compressed air, gas
Further measures can be found in the "Power source" operating instructions or
in the documentation of further peripheral devices.
3 Product Description
3.1 Technical Data
Ambient temperature Welding
- 10 °C to + 40 °C
Transport and storage - 25 °C to + 55°C
Relative humidity
up to 90 % at 20 °C
Tab. 1
Ambient conditions for shipment and storage
Type of voltage
DC or AC
DC polarity of the electrodes Usually negative
Type of use
automatic
Voltage rating 141 V peak value
Max. arc ignition and stabilization voltage
12 kV
Protection type of the machine side connections IP2X (EN 60 529)
Shielding gas
as per DIN EN 439
Electrode commercially available tungsten electrodes
suitable for TIG use, preferably low-radiation
Required cooling unit capacity 800 W
Tab. 2 General torch data (EN 60 974-7)
Type Type of
cooling Load ED Electrode

Gas
flow Cooling Torch inlet
pressure
ABITIG
®
MT DC AC* Max. supply
temp. Min.
flow min. max.
A A % mm l/min °C l/min bar bar
260W
liquid 260 180 100 1,0 - 3,2 7 - 20 50 0,7 2,5 3,5
200 air 200 140 60 1,6 - 4,0 7 - 20
Tab. 3 Product-specific torch data (EN 60 974-7)