EN - 7
ABITIG
®
MT
2 Safety
2.5 Product safety
• The product has been developed and manufactured in accordance with
state-of-the-art methods and the recognized safety standards and
guidelines. These operating instructions warn you against unavoidable
residual hazards for user, third parties, devices or other material property.
The disregarding of these warnings may result in risk to the life and health
of personnel, environmental damage or material damage.
• The product may only be operated in unchanged and technically perfect
condition, within limits described in these instructions.
• Always observe limit values specified in the technical data. Overloading
leads to torch destruction.
• Safety devices on the device may never be dismounted, bridged or
avoided in another manner.
• During welding work outdoors, use suitable protection against the effects
of weather.
• Check the electrical device for any damage and for proper functioning in
accordance with its designated use.
• Never expose the electrical device to rain and avoid a moist or wet
environment.
• Protect yourself from electrical accidents by using insulating mats and
wearing dry clothing.
• Never use the electrical device in areas subject to fire or explosion
hazards.
• Arc welding may cause damage to eyes, skin and hearing! When working
with the device, always wear the prescribed protective equipment.
• Any metal vapours, especially lead, cadmium, copper and beryllium are
harmful to health! Ensure sufficient ventilation or extraction. Always ensure
compliance with the legal limit values.
• Rinse work-pieces that have been degreased with chlorinated solvents with
clear water. Otherwise there is a risk of phosgene gas formation. For the
same reason, no degreasing baths containing chlorine must be placed in
the vicinity of the welding area.
• Adhere to the general fire protection regulations and remove flammable
materials from the surroundings of the welding work area, prior to starting
NOTICE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
Содержание TIG ABITIG MT
