Abicor Binzel SR/ABITIG 9, Руководство по эксплуатации

Страница: 12 / 36

EN - 4
3 Safety instructions Valve torch SR/ABITIG
®
*According to EN 60 974-7 the value for alternating current (AC) must be
given at 70% of the tested direct current value (DC).
All data refer to 4 m cable assemblies. For any further information regarding
the available cable assembly designs and performance data, please refer to
the current order documentation.
3 Safety instructions
Please observe the attached safety instructions.
3.1 Classification
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
3.2 Emergency information
In case of emergency, immediately interrupt the power and shielding gas
supplies. Further measures can be found in the "Power source" operating
instructions or in the documentation of further peripheral devices.
DANGER
Describes imminent threatening danger. If not avoided, it may cause severe
injuries or death.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.