Abicor Binzel MFS-V3 M-Drive, Руководство по эксплуатации, Страница: 111 / 124

MFS service software 13 Diagnosis
EN - 49
13 Diagnosis
NOTICE
• An active connection to the eBOX is required for these settings.

9.6 Testing the connection on page EN-18
Description Screenshot
The diagnosis mode can be used to check if the
drives, wire actual value encoder, inching
button, reset button and key switch are
functioning correctly.
The functional checks can only be selected in
diagnosis mode if there is no active process.
Furthermore, it is not possible to conduct a
process start while diagnosis mode is enabled;
the system reports ‘System not ready’.
Testing drives
• With the wire inserted, open the rocker
arms on the pressure rolls on the drive!
or
or
or