Abicor Binzel MFS-V3 M-Drive, Руководство по эксплуатации, Страница: 106 / 124

EN - 44
11 Monitoring mode MFS service software
11 Monitoring mode
NOTICE
• An active connection to the eBOX is required for these settings.

9.6 Testing the connection on page EN-18
Description Screenshot
Example
Channel 1 Wire actual value
Channel 2 Motor current rear drive
Channel 3 Motor current front drive
Channel 4 Used data volume
Channel 5 Start signal
The Monitoring window is divided into several sections.
Top left History list of the log files. These are stored here successively and can be loaded for
viewing by double-clicking them. All log files are stored as CSV files at the path
specified in the settings.
Centre left History list of the warnings and errors. These are stored here successively and can be
viewed more closely or removed from the list by right-clicking them. All messages are
permanently stored in an ‘ErrorLog.txt’ file at the specified log path. If the list is
cleared in the Monitoring window, this is entered in the ‘ErrorLog.txt’ file using the
entry ‘ACK’ plus a time stamp.
Bottom left Status indicator for the start/stop trigger, start/stop visualisation, recording/cycle
time and warning and error statuses.
Middle Time diagram for displaying the channels. Up to 8 channels can be included.
or or