Abicor Binzel MFS-V3 M-Drive, Руководство по эксплуатации, Страница: 64 / 124

EN - 2
MFS service software
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes
will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating instructions
are the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective owners/manufacturers.
To obtain contact data for the ABICOR BINZEL representative or partner in a specific country, please visit our homepage
www.binzel-abicor.com.
1 Identification EN-3
2 Areas of application EN-3
3 System requirements EN-3
4 Connecting the eBOX to a PC EN-4
5 Installing the software EN-5
5.1 Software installation settings for Windows 7 EN-8
5.2 Software installation settings for Windows XP EN-10
6 Configuring the driver EN-12
7 Starting the software EN-14
8 User levels/user rights EN-15
9 Setting up the software EN-16
9.1 Device type settings EN-16
9.2 Connection type settings EN-16
9.3 Ethernet IP address (only in connection with
Profinet-controlled MFS-V2 systems)
EN-17
9.4 Ethernet option with the device type MFS-V3 EN-17
9.5 CAN bus (only in conjunction with MF control) EN-18
9.6 Testing the connection EN-18
9.7 Channel visualisation monitoring settings, user
level 1
EN-19
9.8 Channel visualisation monitoring settings, user
level 2
EN-20
9.9 Drive, gear reduction, encoder and measuring
wheel monitoring settings, user level 2
EN-24
9.10 Start/stop trigger monitoring settings, user
level 2
EN-25
9.11 Log file path monitoring settings, user level 2 EN-26
9.12 Process data display settings, user level 2 EN-27
9.13 Signal description IO settings, user level 2 EN-28
9.14 Signal description Dig IO settings, user level 2 EN-30
9.15 Device type settings EN-31
9.15.1 eBOX (MFS-V3 only) EN-31
9.16 Service interval settings (MFS-V3 only) EN-32
10 Job mode (MFS-V3 only) EN-33
10.1 Normal control EN-33
10.2 Job selection EN-33
10.3 Job file editor settings (MFS-V3 only) EN-34
10.4 Job list eBOX settings (MFS-V3 only) EN-38
10.5 Job window (MFS-V3 only) EN-41
10.6 Job window edit mode (MFS-V3 only) EN-43
11 Monitoring mode EN-44
11.1 Closing the Monitoring window EN-45
12 System Information EN-46
13 Diagnosis EN-49
13.1 Checking the measuring wheel EN-52
13.2 Workflow EN-53
14 Warnings and error messages (status) EN-55
15 Releasing the user levels and rights EN-58