Abicor Binzel MF1-Rear, Руководство по эксплуатации

Страница: 29 / 76

MF1 rear 6 Putting into operation
EN - 11
6.1.2 Mounting the driving rolls
1 Unscrew and remove the knurled screws (3) .
2 Place the drive rolls (4) on guide pins on the drive gears (2) and secure with knurled screws (3) .
6.2 Installing the MF1 rear
Due to the different installation situations in systems, the system constructor/operator is responsible for
ensuring that the MF1 rear is duly installed. Mount the MF1 rear on a mounting plate of a suitable size.
NOTICE
• Red drive rolls = V-groove / blue drive rolls = U-groove
DANGER
Electric shock
Hazardous current during hot wire applications.
• All MF drives must be installed so as to be electrically insulated from other peripheral devices.
• Use insulating sleeves to fasten the screws on the robot.
NOTICE
• Ensure clear access to the control elements and connections.
• Select a location that allows a short and rectilinear wire feed.
• The dimensions of the following mounting holes are identical for the MF1 and MF1 rear.
Fig. 3 Mounting hole dimensions in mm
36.40
4
3
.9
0