iROB Feed HA
2 Safety
BAL.0737.0 • 2019-11-15
EN - 5
2.6 Safety instructions for the mains connection
• The mains connecting cable must be checked for damage and wear at regular intervals.
• The device may only be operated with an undamaged power supply cable.
• Only qualified personnel are permitted to perform work on the device or system.
• When replacing the power plug of the power supply cable, protection from splashes and the mechanical strength must
still be guaranteed.
2.7 Warning and notice signs
The following warning and notice signs can be found on the product:
These markings must always be legible. They may not be covered, obscured, painted over, or removed.
2.8 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Gas supply
Further measures can be found in the operating instructions for the power source or the documentation for other peripheral
devices.
NOTICE
• Make sure that the power supply cable is not damaged by being driven over, crushed, torn or similar.
Symbol
Meaning
Read and observe the operating instructions!
Crushing of fingers!
Warning against hot surfaces!
Содержание iROB Feed HA
