Abicor Binzel FEC W3, Инструкция по эксплуатации

Страница: 45 / 132

FEC W3 6 Putting into operation
BAL.0675.0 • 2019-09-16
EN - 13
6 Putting into operation
6.1 Transport and installation
Select a location that enables a short and straight extraction hose feed and prevents it from entering the employee’s space
for movement.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair work:
• Switch off the
FEC W3 extraction system.
• Close off the compressed air supply.
• Disconnect all electrical connections.
NOTICE
• Note of the following instructions:

3 Product description on page EN-7
• Only qualified personnel are permitted to perform work on the device or system.
CAUTION
Risk of injury
Injuries may be caused by improper handling:
• Use an appropriate lifting tool with load securing devices for transport and installation.
• Avoid lifting and setting down the device abruptly.
• If passing over an edge, ensure that the filter housing is not in position on the system as this can damage the filter
housing.
• Do not lift the components over persons or other devices.
• Wear your personal protective equipment: safety shoes with steel toe caps, protective gloves, ear protectors.
• Send bystanders out of the danger zone.
• Note the weight of the extraction system when lifting it.

3.1 Technical data on page EN-7
CAUTION
Risk of toppling
Physical injury or damage can result from the improper assembly of the extraction system.
• Disconnect the supply lines.
• Place the extraction system on a suitable surface (flat, solid, dry) on which it will not topple over.
NOTICE
• Protect the components from rain and direct sunlight.
• Only use the device in dry, clean and well-ventilated rooms.