Abicor Binzel AUT 610D, Руководство по эксплуатации

Страница: 33 / 68

EN - 17
MAG 12 Disposal
12 Disposal
For disposal, the local regulations, laws, provisions, standards and guidelines
must be observed. For the MAG to be properly disposed of, they first must be
dismounted.

See 11 Dismounting on page EN-16
12.1 Materials
This product is mainly made of metallic materials which can be molten in steel
and iron works and are thus almost infinitely recyclable. The plastic materials
used are marked in preparation for sorting and separation of the materials for
later recycling.
12.2 Consumables
Oils, greases and cleaning agents must not contaminate the ground and not
enter the sewerage. These materials must be stored, transported and disposed
of in suitable containers. Please observe the relevant local regulations and
disposal instructions of the safety data sheets given by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the manufacturer
of the consumables.
12.3 Packaging
ABICOR BINZEL has reduced the packaging for shipping to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.