Abicor Binzel ABIROB G360, Руководство по эксплуатации, Страница: 15 / 52

Alignment jig 4 Scope of delivery
EN - 5
3.2.1 Nameplate
The Alignment jig is labelled with an ID number on the mounting plate.
When making enquiries, please note the following information:
• ID number
3.3 Signs and symbols used
The following signs and symbols are used in the operating instructions:
4 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current
catalogue. Contact details for advice and orders can be found online at
www.binzel-abicor.com .
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
• Torch-specific Alignment jig • Gauging and setting sleeves
• Adjusting lever • Operating instructions
Tab. 5 Scope of delivery
NOTICE
• The Alignment jig is delivered to match a neck change torch with a clamping and guide body as well
as gauging and setting sleeves and an adaptor.
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Packaging for returns Where possible, use the original packaging and the original packaging
material. If you have any questions concerning the packaging and/or how to
secure an item during shipment, please consult your supplier.
Tab. 6 Transport