Abicor Binzel ABIROB G360, Руководство по эксплуатации, Страница: 14 / 52

EN - 4
3 Product description Alignment jig
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. Arranged in descending order of importance, they have the following
meanings:
3 Product description
3.1 Technical data
3.2 Abbreviations
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical
injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorized.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).
Ambient temperature -10°C to +40°C
Relative humidity Up to 90% at 20°C
Tab. 1 Ambient conditions during operation
Storage in a closed environment, ambient temperature -10°C to +40°C
Ambient temperature for shipment -25°C to +55°C
Relative humidity Up to 90% at 20°C
Tab. 2 Ambient conditions for transport and storage
NOTICE
• As the version of the Alignment jig depends on the torch type used, no technical data are listed here.
ABIROB
®
G
Automatic welding torch
Tab. 3 Abbreviations and term definitions
Unit of measurement in drawings or diagrams
Millimeters [mm]
Tab. 4 Dimensions