![background image](http://html1.mh-extra.com/html/abbott/ionicrf-rf-pole/ionicrf-rf-pole_instructions-for-use-manual_3327754010.webp)
6
Figure 4. Tightening the cap-head screws
1.
Top of pole mount
clamp placed
1.2 cm to 5.1 cm
(0.5 in to 2 in)
below the bottom
edge of the black
pole cap
3.
Using the screwdriver included in the kit, tighten the cap-head
screws, alternating between the two, until the pole mount
clamp base is firmly attached to the clamp cap.
WARNING: Ensure the pole mount is securely fastened to
the pole before attaching the generator. Failing to secure
the pole mount may cause the product to fall, resulting in
product damage or injury.
Step 2: Remove the Countertop Stand
NOTE: The IonicRF™ Generator is supplied with an attached
countertop stand. Before attaching the pole mount to the
generator, the countertop stand must be removed. Always
place the generator on a level surface when adding or
removing the countertop stand.
Содержание IonicRF RF-POLE
