Abbott i-STAT Alinity Скачать руководство пользователя страница 190

Страница: 190 / 296

Basic Functions

The Basic Functions tab includes settings such as volume, action taken when the i

‑

STAT memory is full,

and transmitting results.
On Basic Functions screen you can define settings for these features:

Sound

Enable Sound

Unselect the checkbox to turn sound off. This will disable all sounds.

Volume Levels

With sound enabled, you can set the volume for these functions. From

the drop down box, select a value from 0 to 100%. Selecting 0 turns

sound off. The default is 100%. You can also adjust the sound using the

slider bar. Click and drag the dot left or right along the "ruler" to raise

or lower the volume.

Basic Functions
Transmitting
Touch Screen
Barcoding
Results Display

Inactivity

Results Present, Data Entry

Complete

The instrument will power down after the chosen number of seconds

have elapsed.

Results Present, Data Entry

Pending

The instrument will power down after the chosen number of seconds

have elapsed.

Training Mode Active

The instrument will power down after the chosen number of seconds

have elapsed.

Software Updates

Software Expiration Warning

Number of days prior to the expiration of the instrument software to

display a warning message on the screen. Allowable values are 0

through 30. The default is 15 days. The following is an example of the

message displayed:

Software expires on:
31DEC2020
Testing will be disabled on that date.
Contact the system administrator

Require Electronic Simulator

test after software installation

After the software update, select this option to lock out the

instrument to prevent it from being used until the electronic simulator

test is performed and passed.

Update and install software

from Server

After the software update is downloaded from the Abbott Managed

Server, or the SDi, the instrument will install the software without

requiring the installation confirmation.

150

i-STAT Alinity — System Operations Manual

Art: 746300-01 Rev. N

Rev. Date: 02-Nov-2022

Содержание i-STAT Alinity









































































































































































































































































































Результаты поиска

Содержание i-STAT Alinity

Отзывы:

Abbott i-STAT Alinity, Руководство по эксплуатации, Страница: 190 / 296

Результаты поиска

Содержание i-STAT Alinity

Отзывы: