![background image](http://html1.mh-extra.com/html/abbott/eterna-32400/eterna-32400_clinician-manual_3325945014.webp)
Replacing the Generator
The following steps outline the suggested procedure to replace an generator:
1. Turn off stimulation or verify that it is turned off.
1.
CAUTION: Exercise care when using sharp instruments or electrocautery around leads or
extensions, or they may be damaged.
2. Open the generator implant site per normal surgical procedure.
2.
3. Insert the torque wrench through the septum of the generator header and loosen the setscrew by
3.
turning it counterclockwise.
CAUTION: When performing the following step, do not bend the lead or extension sharply; or it
may be damaged.
4. Gently remove the lead or extension from the generator header; then clean and dry all connections,
4.
ensuring they are free of fluid and tissue.
5. To complete the generator replacement procedure, see the following sections: “Connecting a Lead or
5.
Extension to the Generator” (page 8) and “Implanting the Generator” (page 9).
Disposing of Explanted Components
Explanted Abbott Medical components should be returned to Abbott Medical for proper disposal. To return
an explanted component, place it in a container or bag marked with a biohazard label and coordinate the
return with your Abbott Medical representative or Technical Support.
Checking the Status of the Generator Battery
The generator contains a rechargeable battery. The amount of time that the battery will provide active
stimulation depends on the patient’s stimulation settings and daily usage time. To check the status of the
generator battery, use the clinician programmer app or patient controller app.
NOTE: Generator battery status is available upon initial connection to the clinician programmer app and the
patient controller app.
The following list provides additional information about the battery status:
▪
Stimulation will automatically stop when the battery cannot support stimulation.
▪
▪
Alert messages will appear on the clinician programmer app and the patient controller app when the
▪
generator battery is low or depleted and when charging is required to maintain uninterrupted
stimulation therapy.
▪
An elective replacement indicator (ERI) message will appear on the clinician programmer app and
▪
patient controller app stating the generator may need to be replaced due to the generator battery
approaching its end of service.
NOTE: With rechargeable batteries, intervals between charging may become more frequent with use
over time.
Technical Support
For technical questions and support for your product, use the following information:
▪
+1 855 478 5833 (toll-free within North America)
▪
▪
+1 651 756 5833
▪
For additional assistance, call your local Abbott Medical representative.
10
Содержание Eterna 32400
