Abbott CELL-DYN 3200, Руководство оператора системы

Страница: 609 / 684

CELL-DYN ® 3200 System Operator’s Manual
14-21
9140181H—October 2001
Section 14 Reticulocyte Package
The Westgard ® Rules are discussed in detail in Section 11: Quality Control .
Figure 14.9 QC FILE SET UP Screen
Procedure: QC File Set Up
1. Select a file from the
RETIC QC LOG
screen by using the arrow keys on the
keyboard to move the cursor into the desired file.
2. Press the
[QC FILE SET UP]
key to display the
QC FILE SET UP
screen.
3. If necessary press the [LOT NUMBER] key and move the cursor to the <Lot
Number> entry field. Enter the alphanumeric lot number with up to 9
characters. Press the Enter key on the keyboard to save the entry.
4. The cursor will move to the <Expiration Date> entry field. Use the same
format indicated using one or two digits. Separate the digits with a slash (/)
or a period(.). Press the Enter key on the keyboard to save the entry.
5. The cursor will advance to the <WESTGARD RULE SELECTION> entry
fields. Use the arrow keys on the keyboard to position the cursor at the
desired Westgard
® Rule. Press the
[TOGGLE ON/OFF]
key to enable or disable
the rule and advance the cursor.
6. Repeat step 5 until all desired rule selections have been made.
7. If desired, press the
[PRINT]
key to obtain a printout of the entries.
8. Press the
[RETURN]
key to return to the
RETIC QC LOG
screen.
9. These steps can be repeated for each QC file you need to set up.
QC FILE SET UP
Ready
Feb 23 2001
Operator ID
Req Seq#
19:00
R0001
ACS
REPLICATE
ID
TOGGLE
ON/OFF
RETURN PRINT
FOR FILE 1
Lot Number: _ _ _ _ _ _ _
Expiration Date (Month/Day/Year): _ _/_ _/_ _
WESTGARD RULE SELECTION:
ON RULE 1:
OFF RULE 2:
ON RULE 3:
OFF RULE 4:
ON RULE 5:
OFF RULE 6:
Value outside 3 SD.
Two consecutive values outside SAME 2 SD.
Two consecutive values outside OPPOSITE 2 SD.
Two of three consecutive values outside SAME 2 SD.
Four consecutive values outside SAME 1 SD.
Ten consecutive values on SAME side of mean.