Abbott CELL-DYN 3200 Скачать руководство пользователя страница 426

Страница: 426 / 684

9-56

CELL-DYN

3200 System Operator’s Manual

9140181K—July 2002

Service and Maintenance

Nonscheduled Maintenance Procedures

Section 9

Figure 9.22 Fuse Replacement

5. If it has obviously failed, replace it. Note the amp reading on the fuse and be

sure you replace it with the correct fuse (8-amp or 4-amp).

NOTE:

If the power setting is 110/120 VAC, use the 8-amp fuse. If the
power setting is 220/240 VAC, use the 4-amp fuse.

6. If you are not sure if the fuse has failed, replace it and see if the problem is

corrected.

7. To replace a fuse, insert the new fuse (either end) into the holder. Insert the

holder (fuse first) all the way into the fuse slot.

8. Insert a flathead screwdriver into the notch on the fuse holder, push in, and

turn clockwise to tighten the fuse holder.

9. Reconnect the power cord and turn the system ON.

10. Record the maintenance in your maintenance log.

Preparation for Shipping or Extended Period of Non-Use

The Prepare For Shipping cycle must be run if the instrument will not be used for
two weeks or more. This cycle must also be run if:

a. The instrument will be shipped
b. The instrument will be moved (for example, to a different location within

a laboratory) and movement will require detaching the reagent inlet
tubing.

1 Power Supply
2 Fuse Holder
3 Fuse Holder Notch

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды

Abbott CELL-DYN 3200, Руководство оператора системы

Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды