manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 359

CELL-DYN

®

3200 System Operator’s Manual

7-3

9140181H—October 2001

Section 7

Operational Precautions and Limitations

Precautions

Reagent Storage and Handling

• Store reagents, calibrators, and controls according to the directions contained 

in the package labels and/or inserts.

• Protect reagents from extreme heat and freezing during storage. 

Temperatures below 0

°

C (32

°

F) may cause layering that changes the tonicity 

and conductivity of the reagent. If freezing occurs, do not use the reagent.

• Protect reagents from direct sunlight, evaporation, and contamination. Use 

the Reagent Container Cap attached to each length of inlet tubing to minimize 
evaporation and contamination.

• Never add remaining reagent from a container being replaced to a freshly 

opened container. This may contaminate the new reagent.

• Never use a hemoglobin standard other than the one specified for the 

CELL-DYN 3200 System. The CELL-DYN 3200 System uses a 
cyanide-free reagent.

Printer Precautions

The printhead on dot matrix printers can get very hot during extended periods of 
printing. Allow it to cool before touching it. Heat is not a problem with ink jet or 
bubble jet printers.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды