manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 280

5-128

CELL-DYN

®

3200 System Operator’s Manual

9140181K—July 2002

Operating Instructions

Using The Data Log

Section 5

Previous Specimen

The 

[PREVIOUS SPECIMEN]

 key is used to display the results for the sequence 

number preceding the one currently displayed without returning to the main 

DATA 

LOG

screen.

Next Specimen

The 

[NEXT SPECIMEN]

 key is used to display the results for the sequence number 

following the one currently displayed without returning to the main 

DATA LOG

screen.

Edit Specimen

The 

[EDIT SPECIMEN]

 key is used to edit patient demographic information for the 

selected record. It may also be used to edit and display the results with a Parameter 
or Patient Limit Set different from the one currently displayed. The following soft 
key labels are displayed when the 

[EDIT SPECIMEN]

 key is pressed:

CONFIRM
CANCEL

These keys are used to 

[CONFIRM]

 or 

[CANCEL] 

the edits. The Bulletin line displays 

the message 

PRESS CONFIRM TO SAVE CHANGES OR CANCEL TO 

CANCEL CHANGES

. When the 

[CONFIRM]

 key is pressed, the edited record is 

displayed.

Customize Report

The 

[CUSTOMIZE REPORT]

 key is used to customize the 

RUN

screen display, header 

and printout as described in the Set Up Instructions section of this chapter.

Transmit Specimen

The 

[TRANSMIT SPECIMEN]

 key is used to transmit the displayed report to a 

Laboratory Information System or on-line computer. If auto-transmit extended 
histograms or scatter plots is selected, the transmit specimen key will transmit the 
extended data.

Print Ticket

The 

[PRINT TICKET]

 key is used to print a ticket (in the currently selected format) 

for the displayed record.

Print Report

The 

[PRINT REPORT]

 key is used to print a graphics report (in the currently selected 

format) for the displayed record.

NOTE:

If color printing has been selected (refer to the Set Up Instructions), the 
key label changes to 

[COLOR PRINT]

.

Return

The 

[RETURN]

 key is used to return to the main

DATA LOG

screen.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды