manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 215

CELL-DYN

®

3200 System Operator’s Manual

5-63

9140181H—October 2001

Section 5

Operating Instructions

Start-Up Procedure

To startup the instrument, do the following:

1. If the instrument is OFF, first turn the power ON. When 

INITIALIZED

 is 

displayed in the 

MAIN MENU

 Status Box, press 

[RUN]

 to prime the instrument 

and bring it to the READY state.

2. If the instrument is already ON and 

STANDBY

 or 

INITIALIZED

 is 

displayed in the 

MAIN MENU

 Status Box, press 

[RUN]

 to prime the instrument 

and bring it to the READY state.

3. Perform the daily Quality Control checks as directed within this section.

Daily Start-Up Procedure

The daily start-up routine consists of the following procedures:

1. Check the reagent levels and replace reagent containers as necessary.
2. Check printer paper; add more paper as necessary.
3. Check tubing in the Normally Closed Valves and Sample Transfer Peristaltic 

Pump for breaks, crimps, or other obstructions.

4. Run background counts until acceptable results are obtained for all 

background parameters (WBC, RBC, HGB, and PLT). Acceptable results are 
specified in 

Section 4: 

Performance Characteristics and Specifications

;

 

Subsection: 

Background Counts

.

5. Quality control procedures (which confirm calibration) should be performed 

on a daily basis according to the laboratory’s protocol. Commercial control 
materials should be properly warmed and mixed according to the 
manufacturer’s recommendations. Patient controls should be handled 
according to the laboratory’s protocol. 

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды