manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 214

5-62

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Routine Operation

Section 5

Power OFF Procedure

It is not necessary to turn the system OFF under normal operating conditions. The 
system should be turned OFF when certain maintenance procedures will be 
performed, when the system will be moved, or when the system will be inactive for 
an extended period of time (longer than 2 weeks).

For Maintenance

When certain tests or maintenance procedures require power to be OFF, use the 
following procedure:

1. With the system still ON, perform any maintenance that is due.
2. Perform the Auto-Clean procedure in the 

SPECIAL PROTOCOLS

 menu. (If 

necessary, refer to 

Section 9: 

Service and Maintenance

;

 

Subsection: 

Daily 

Maintenance Procedures

.)

3. When the Auto-Clean cycle is finished, press 

[DAILY SHUTDOWN]

. When the 

Daily Shutdown cycle is finished, the message 

STANDBY

 will be displayed 

in the Status Box.

4. Turn the power switches OFF in the following order:

a. System (includes Analyzer, Data Module, and Sample Loader)
b. Display Monitor
c. Printer

NOTE:

In an emergency situation, turn power OFF in any order as quickly 
as possible.

For Extended Period

Additional procedures are required if the instrument will be inactive for an 
extended period of time (more than 2 weeks), moved to a different location in the 
lab, or shipped to a distant location. For detailed instructions, refer to 

Intermediate-term Shutdown

 and 

Prolonged Shutdown

 later in this section.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды