manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 212

5-60

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Routine Operation

Section 5

To power-up the instrument:

1. Verify that all components are properly installed (syringes, tubing in the 

normally closed valves, Shear Valve, etc.).

2. Verify that all reagents are properly installed.
3. Verify that all necessary cables and power cords are properly connected.
4. Verify that the Analyzer covers are properly installed, including the Tower 

Cover.

5. If a condition caused power to the instrument to be turned OFF, verify that 

the condition has been corrected.

6. Turn the power switches ON in the following order:

a. System (includes Analyzer, Data Module, and Sample Loader)
b. Display Monitor
c. Printer

7. When the

 

INITIALIZED

 message appears in the Status Box on the 

MAIN 

MENU

, press

[RUN]

 

to prime the system.

Initializing the System

The term 

initialization

 refers to the automatic process that occurs when the 

instrument is first turned ON, or after certain problems have been corrected and the 
instrument must again be brought to the READY state. Initialization is a two-step 
process:

1. Initializing the hardware and software
2. Priming the system with reagents

The system is initialized when the Analyzer is turned ON or when the

[INITIALIZATION]

 key, located in the second 

DIAGNOSTICS MENU

, is pressed. During 

the initialization process, the software located in the Data Module is accessed and 
downloaded to the Analyzer. When this has been accomplished, all Analyzer 
pumps and motors are moved to their “home” positions. (Increase motor noise is 
common during this period.) When the system has been initialized, the message 

INITIALIZED

 is displayed in the Status Box.

The next step is to prime the system with reagents. When the

 

initialized message 

appears in the Status Box on the 

MAIN MENU

, press 

[RUN]

 

to prime the system. 

When the priming cycle is finished, the message 

READY

 is displayed in the Status 

Box.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды