manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 211

CELL-DYN

®

3200 System Operator’s Manual

5-59

9140181H—October 2001

Section 5

Operating Instructions

Routine Operation

General Information

This subsection contains information and procedures that are recommended for the 
routine operation of the CELL-DYN 3200.

The following topics are included in this subsection:

Instrument Start-up

RUN

 menu

Sample Collection and Handling
Sample Analysis on the CELL-DYN 3200 SL
Sample Analysis on the CELL-DYN 3200 CS
Daily Shutdown Procedure

Unless stated otherwise, all subsections apply to both the Sample Loader and 
Closed Sampler versions of the CELL-DYN 3200. For convenience, instructions for 
running samples in the Open Mode are repeated in each of the two 

Running Samples

 

subsections. Refer to

 

Section 13: 

Sample Loader 

for additional information on 

Sample Loader operation and to 

Appendix A

 for information on the use of bar code 

labels.

Power ON Procedure

The System power switch on the back of the Analyzer should be left ON at all 
times. The instrument has been designed to automatically maintain itself when it is 
idle. If the instrument is idle for four hours, an automatic Shutdown cycle is initiated. 
The instrument is placed in the 

STANDBY

 state at the end of the automatic Shutdown 

cycle.

Power switches for the Display Monitor and printer should be left ON as long as 
power to the System is ON. Power to the monitor and printer should be turned OFF 
when the System is turned OFF, when a malfunction is suspected, or when 
maintenance is required.

Power to the Printer may be left on or off at the operator’s discretion. Refer to 

Section 12: 

Printers

 for complete instructions on printer operation.

IMPORTANT: 

If the power has been OFF more than five minutes, the laser 

must be allowed to warm up for 15 minutes once the power is turned back 
ON. Do not process samples during this warm-up period.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды