manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 199

CELL-DYN

®

3200 System Operator’s Manual

5-47

9140181H—October 2001

Section 5

Operating Instructions

Customize Report

The

[CUSTOMIZE REPORT]

 key is used to customize displayed and/or printed 

reports. When the

[CUSTOMIZE REPORT]

 key is pressed, the screen that was 

displayed last will appear (Graphics Printer is the default screen). 

Customize Printout

The 

[CUSTOMIZE PRINTOUT]

 key is used to customize the printout for the Graphics 

Printer and the Ticket Printer. For ease of explanation, the two printer types are 
discussed individually. Specific instructions are given for customizing a report for 
the graphics printer, for a blank ticket, and for a pre-printed ticket. When the 

[CUSTOMIZE PRINTOUT]

 key is pressed, some of the soft key labels change with the 

type of printer that is selected. The following soft key labels are displayed when 
the key is pressed:

GRAPHICS PRINTER/
TICKET PRINTER

(The key alternates between the selections.)

CUSTOMIZE DISPLAY
STOP PRINTING
CUSTOMIZE HEADER
TOGGLE ON/OFF
SET UP

When the 

[CUSTOMIZE PRINTOUT]

 key is pressed, the screen that was used for the 

last entry (graphics printer or ticket printer) is displayed. A brief description of the 
function of the soft keys is given in this section. For ease of explanation, the keys 
are grouped according to the type of printer selected.

When the

[TICKET PRINTER]

 key is pressed, the following soft key label is also 

displayed:

BLANK TICKET/
PRE-PRNTD TICKET

(The key label alternates between the selections.)

The

[CUSTOMIZE DISPLAY]

key is used to customize the display as discussed in the 

next section.
The 

[STOP PRINTING]

 key is used to stop printing that is in progress. When the 

[STOP PRINTING]

 key is pressed, the following soft key labels are displayed:

CONFIRM STOP
CANCEL STOP

The 

[CANCEL STOP]

 key cancels the Stop Printing command. If 

[CONFIRM STOP]

 is 

pressed, the print buffer (the memory area where the material is stored while 
awaiting printing) is cleared and the bulletin line displays the message:

PRINTING STOPPED. RESET PAPER TO THE TOP OF THE PAGE

Two additional keys are displayed when the

[CUSTOMIZE HEADER]

key is pressed:

RESTORE HEADER
BLANK HEADER

The 

[TOGGLE ON/OFF]

 key enables or disables the option selected by the position 

of the cursor. The key label is not displayed when a numeric entry is required.
The 

[SET UP]

 key is used to return to the 

SET UP MENU

 

screen.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды