manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 177

CELL-DYN

®

3200 System Operator’s Manual

5-25

9140181H—October 2001

Section 5

Operating Instructions

Figure 5.9 QC Range Entry Screen

Range Entry

1. Select a file from the 

QC SET UP

 

screen by using the Arrow keys on the 

keyboard to move the cursor into the desired file.

2. Press 

[QC LIMITS]

 to display the 

QC RANGE ENTRY

 

screen for the selected file.

3. Use the Arrow keys on the keyboard to move the cursor to the desired entry 

field.

4. Type the numbers and press the Enter key on the keyboard to save each entry 

and advance the cursor to the next entry field.

5. Repeat step 4 until all entries have been made.
6. If desired, press 

[PRINT]

 to obtain a printout of the entered values.

7. Press

[RETURN]

 to save the entries and return to the 

QC SET UP

screen.

NOTE:

When the entries are saved by pressing the

 

[RETURN] 

soft key, the 

software checks to see if any entries would result in the upper limit 
being less than the lower limit. If this situation occurs, the limits are 
automatically reversed. The bulletin line displays the message:

LIMITS WERE EXCHANGED TO MAKE UPPER > LOWER

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды