Abbott CELL-DYN 3000, Руководство оператора

Страница: 494 / 542

CELL-DYN

3000 System Operator’s Manual
10-65
9140240E — May 1995
Chapter 10 Troubleshooting
Table 10.2 General Fault Conditions (Continued)
Auto-Sampler alarm condition <x,x> see DIAG/BL
NOTE: The characters in the brackets identify the condition.
– – – – – Probable Cause – – – – – – – – Corrective Action – – – –
1. The Sample Loader 1. From the first
detected a hardware fault DIAGNOSTICS MENU
and ceased operation. Screen , press [FAULT
REPORT] followed by
[PRINT] to obtain a
printout describing the
problem. Initialize the
Sample Loader by pressing
the INIT key on the Sample
Loader operation keyboard.
Samples may be processed
if the fault does not recur.
2. Circuitry malfunction. 2. Call for technical assistance.
__________________________________________________________
Auto-Sampler command negatively acknowledged/BL
– – – – – Probable Cause – – – – – – – – Corrective Action – – – –
1. The Sample Loader did 1. Ensure that the Sample
not respond to an Analyzer Loader power cord is
command. connected to the Sample
Loader and that the cord is
connected to the power
outlet. Initialize the Sample
Loader by pressing the INIT
key on the Sample Loader
operation keyboard.
Check the connections of
the cable that connects the
Sample Loader to the
Analyzer. If necessary,
secure the connections.
Initialize the Sample Loader
by pressing the INIT key on
the Sample Loader
operation keyboard.
2. Circuitry malfunction. 2. Call for technical assistance.
Search Go Back Book TOC