![background image](http://html2.mh-extra.com/html/abbott/3599/3599_clinician-manual_5034347022.webp)
7. Slide the panel closed flush with the EPG until it snaps into place.
7.
NOTE:
▪ When you insert the batteries, the indicator light is solid. You must wait until the indicator light is
▪
flashing or off to set up communication.
▪ If you replace the batteries but the generator battery indicator on the clinician programmer app or
▪
patient controller app indicates the batteries are low, make sure the batteries are inserted
correctly.
Checking the Status of the EPG Batteries
Check the status of the EPG’s batteries using the clinician programmer app or the patient controller app.
Refer to the clinician’s programming or user’s controller manual for these directions.
NOTE: Battery life depends on usage and stimulation settings, with batteries lasting at least 14 days under
nominal or practical high output tonic settings, with 500 ohm impedance and stimulation on for 16 hours
per day. (High output is based on actual patient use collected in Abbott Medical clinical studies, not the
maximum device output.)
The following information provides general guidelines for the battery status:
▪
The battery status icon on the clinician programmer app or patient controller app shows a decreasing fill
▪
as the batteries are used.
▪
A warning will appear on the clinician programmer app or patient controller app when the batteries are
▪
critically low.
16
Содержание 3599
