Product Manual
Abbexa Ltd., Cambridge Science Park, Cambridge, CB4 0EY, UK
www.abbexa.com · Email: [email protected] · Phone: +44 (0) 1223 755950 · Fax: +44 (0) 1223 755951
Registered in England: 8475531 · VAT Reg. No: GB 167 9240 79
4
3 Operating the device
3.1 Start and stop operation
•
This device operates by touch start.
•
The mixer will automatically start when the rubber cup
is pressed down.
•
The device will stop when the test tube is removed.
•
The mixer has one speed setting at 4500 RPM.
4 System maintenance and troubleshooting
4.1 Safety precautions
•
The vortex mixer should be used only for the application specified in the manual. It
must not be operated in hazardous or flammable environments.
•
Do not move the device while it is in operation.
•
Do not use substances that are hazardous, explosive or highly reactive with this mixer.
•
Only use tubes that have a diameter of 30 mm or less.
•
To avoid spillage, cover tubes before mixing contents. Do not overfill the tubes.
•
If liquid is spilled on the rotor, the mixer must be cleaned immediately.
•
Do not use the device if they show any signs of external mechanical or electrical
damages.
•
Do not fill tubes while they are on the device. Liquid spillage may damage the device.
•
Do not immerse the mixer in liquid or pour liquid over it.
4.2 Instrument disinfection
After using dangerous and/or infectious substances, disinfect the apparatus:
For Reference
Only