1YSA160045-EN - Rev. 5
22 / 33
C.4.5.
Closing of the Unit
Place the cap, holding the tube with the hand, and tighten it using a 34 mm fork spanner (torque between 8 and 10 Nm) without
damaging the O-Ring.
Figure 31.
C.4.6.
wiAutoLink Repositioning
Push the interlocking bolt until blocked (it will rotate freely). Do not strike the bolt, nor use any type of tool to reset.
Figure 32.
Turn the tensioning device support.
Place the tensioning device support facing the interlocking bolt.
