- 32 -
000016BG
S
afety instructions and general information
The equipment has been manufactured in accordance with the strictest
accident-prevention regulations and supplied with safety devices suitable
for the protection of components and operators.
For obvious reasons, it is not possible to anticipate the great number of installations and
environments in which the equipment will be installed; it is therefore necessary for the
customer to appropriately inform the manufacturer about particular installation conditions.
ABB
accepts no liability for failure to comply with the instructions for correct
installation are cannot be held responsible for the systems upstream or
downstream of the equipment it has supplied.
It is essential to provide operators with correct information. They must therefore read and
comply with the technical information given in the manual and in the attached documentation.
The instructions given in the manual do not replace the safety devices
and technical data for installation and operation stuck on the product,
and they certainly do not replace the safety regulations in force in the
country of installation and common sense rules.
The manufacturer is willing to train staff, at its premises or on site, in
accordance with conditions to be set out in the contract.
Do not use the equipment if you find any operating anomalies.
Avoid temporary repairs. All repairs should be carried out using only
genuine spare parts, which must be installed in accordance with their
intended use.
Liabilities arising from commercial components are delegated to the
respective manufacturers.
1
2
TRAINING
3
Safety and accident prevention
