Mounting
12 - EN
TTH200
CI/TTH200-EN
3.1.3 Installation on a top hat rail
When mounted on a top hat rail, the transmitter can be placed at a distance from the sensor in a
housing that is suitable for the ambient conditions.
A00103
Fig. 4
3.2
Installing/Removing the optional LCD display
A00087
Ø 49,2 / 1,94
35,80 / 1,41
40,80 / 1,60
Fig. 5: HMI type AS LCD display
Thanks to the LCD display interface, the TTH200 can be operated freely with the HMI type AS
LCD-display, enabling process data to be visualized.
Important
The LCD display with HMI type A configuration function, used with the TTx300 series, is not
suitable for the TTH200.
The display must be removed to enable electrical connection of the sensor or the power supply:
- Carefully remove the LCD display from the transmitter inset. The LCD display is held
firmly in place. You may have to use the tip of a screwdriver to pry the LCD display loose.
Take care to avoid any mechanical damage.
