ABB Terra Mobile 44HV, Руководство по эксплуатации и установке, Страница: 47 / 66

Procedure
1. Open the the front door. Refer to
section 9.1 .
2. Remove the nuts (A).
Use the spanner.
3. Carefully remove theses parts:
1. Cover (B)
2. Air inlet filter (C)
Caution:
Prevent contamination of other
parts of the EVSE. Make sure
that contamination on the filter
does not come off.
4. Install these parts:
1. Clean air inlet filters
2. Cover (B)
5. Install the nuts.
6. Close the front door. Refer to section 9.2 .
7.5.2 Replace the air inlet filter on the side
Preliminary requirements
• The EVSE is de-energized.
Refer to section 7.2 .
• Spanner
• Owner • Air inlet filters. Refer to
section 11.10 .
Procedure
1. Open the the right door. Refer to
section 9.1 .
2. Remove the nuts (A).
Use the spanner.
3. Carefully remove theses parts:
1. Cover (B)
2. Air inlet filter (C)
Caution:
Prevent contamination of other
parts of the EVSE. Make sure
that contamination on the filter
does not come off
.
4. Install these parts:
1. Clean air inlet filters
2. Cover (B)
5. Install the nuts.
6. Close the right door. Refer to section 9.2 .
A
B
C
A
A
A
A C B
A
Maintenance and cleaning
9AKK108467A6997-EN | 003 47