ABB SPA-ZC 402, Руководство по установке и пусконаладке

Страница: 69 / 112

69
11. Technical reference
This chapter defines the compliance to IEC 61850 in terms of service, modeling,
engineering interfaces and also exceptions and local adaptations. The information
gives you a detailed explanation of the IEC 61850 capabilities of a product.
This chapter provides information about the following issues:
*
ACSI conformance statement
*
Model conformance statement
*
SCL conformance statement
*
SCL control block
*
Protocol implementation conformance statement
The ACSI conformance statement describes the abstract service interfaces, which
are normally mapped to specific communication service (SCSM) and therefore
indirectly stated in the protocol implementation conformance statement. The
conformance statements and documents are referred to as Protocol Implementation
Conformance Statement (PICS) and Model Implementation Conformance Statement
(MICS).
For the following clauses, the following definitions apply:
Table 11.-1 Notations
M/m Mandatory support. The item must be implemented.
C/c Conditional support. The item must be implemented if the stated
condition exists.
O/o Optional support. The implementation may decide to implement
the item.
x The implementation must not implement this item (excluded).
i The implementation of the item is not within the scope of this
product (out-of-scope).
F/S Functional Standard. Should be applied.
Base Must be applied in any application claiming conformance to this
standard.
SPA/ Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
SPA-ZC 402 SPA-ZC 402
1MRS755380