2TLC172188M0201, rev. H
27
www.abb.com/lowvoltage
2012-01-03
4.4 Menu system
The program uses a number of different forms:
Main menu
The main menu is shown on start up. From here you can reach the different main
functions of the program.
New measurement
From the new measurement form a measurement is performed. Information about the
current status of Smart Logger is shown and the setup of a measurement can be
chosen.
Graph
On the graph form a graph of the measurement is shown and from here you can get
details of the measurement and compare it to other measurements.
Calculations
On the calculations form different calculations can be performed to get a stop time
based on several measurements and calculate safety distance from the machine.
Save
From here a measurement can be saved.
Archive
A list of the saved measurements is displayed. Measurements can be loaded to the
graph form and imported/exported to and from the program.
Settings
Here you can chose how to connect Smart Logger to the computer, what language to
use and what safety standards that should be used for the calculations.
Main menu
When the program is started the main menu is shown. Here you can chose to start a new measurement (New) or
load an existing (Archive). You can also change the settings of the program (Settings).
