2TLC172188M0201, rev. H
13
www.abb.com/lowvoltage
2012-01-03
3.5
SM5/2500 – Linear transducer
Application
SM5 is used during stop timing to give the position and speed of a moving machine part (industrial robot arm,
carriage, cutter, etc.) to Smart Logger.
The housing has three magnets in the base and three on one side so that it can easily be attached to different
ferrous surfaces and machine parts, etc.
The wire can be applied to the moving machine part by means of a magnet or snap hook.
In order to achieve best results the sensor housing should be adjusted so that the machine movement takes place
in line with the alignment of the wire.
The connection cable of SM5 is connected to the encoder connector (I8) on Smart Logger.
Operation
The transducer utilises a digital incremental pulse encoder with a resolution of 10 pulses/mm. Its two-channel
pulse-train is evaluated by Smart Logger to determine the position, speed of movement, and direction of the
moving machine part.
Technical specifications
Manufacturer:
ABB AB / JOKAB SAFETY
Designation:
SM5/2500
Article number:
2TLA070300R0500
Operating voltage:
Supplied from Smart Logger
Stroke length:
2500 mm
Resolution:
0.1 mm (10 pulses/mm)
Max. speed:
5 m/s
Size:
114 x 116 x 125 mm (L x W x H)
Weight:
1.4 kg
Colour:
Black/Yellow
