Installing software
3.
Software requirements
3.1.
SIM600 Editor and SIM600 Runtime are compatible with MS Windows 2000 or newer.
Installing SIM600 Editor and SIM600 Runtime
3.2.
To install SIM600 Editor and SIM600 Runtime:
1.
Insert the installation CD to your PC.
2.
Copy the PRS.exe and PRSEditor.exe files from the CD to the hard disk of your
PC. If you want to install only SIM600 Editor or SIM600 Runtime, copy the
appropriate file to your PC.
You can run SIM600 Editor and SIM600 Runtime also directly
from the CD.
3.
Connect your PC to Protection System Simulator SIM600 with the USB cable.
4.
The Found New Hardware Wizard opens. Select No, not this time to browse for
the correct software on your PC.
5.
Click Next.
driver_installation1.jpg
Figure 3.2-1 Searching for new software
6.
Select Install from a list or specific location (Advanced) and click Next to browse
for the drivers from the correct location.
13
Protection System Simulator SIM600
1MRS756102
Installation Manual
