ABB Sense 7 Series, Оригинальное руководство пользователя

Страница: 12 / 14

2TLC172249M0201, rev. B 12 www.abb.com/jokabsafety
2013-04-10
7 Technical data
Manufacturer
Address ABB AB / JOKAB SAFETY
Varlabergsvägen 11
SE-434 39 Kungsbacka
Sweden
Electrical characteristics
Minimum switched current 10VDC 1mA
Dielectric withstand 250 VAC
Safety channel 1-NC 24VDC 0.2 A max. rating
Safety channel 2-NC 24VDC 0.2 A max. rating
Safety channel 3-NO 24VDC 0.2 A max. rating
Insulation resistance 100 MOhms
General
Switching reliability 3.3 x 10
6
operations at 100mA load
Recommended setting gap 5 mm
Switching Distance
(target to target) S
ao
10 mm close (on)
S
ar
20 mm open (off)
Tolerance to misalignment 5 mm in any direction from 5 mm setting gap
Switching frequency 1.0 Hz maximum
Approach speed 200 mm/m to 1000 mm/s
Vibration resistance IEC 68-2-6, 10-55 Hz 1 mm
Shock resistance IEC 68-2-27, 11 ms, 30 g
Protection class IP69K
Cable Type PVC 8 core 6 mm O.D
Ambient temperature Sense7: -25°C to +80°C
Sense7Z: -25°C to +105°C
Size See drawing
Material Sense7: UL approved polyester
Sense7Z: Stainless steel 316
Colour Red or stainless steel
Mounting position Any
Mounting bolts 2 x M4 Tightening torque 1.0 Nm
Note that the red model (Sense7) is obsolete.
It is only the stainless steel model (Sense7Z) that is active.