ScreenMaster RVG200
Paperless recorder
7 Configuration
OI/RVG200-EN
75
Note.
The following parameters:
are displayed only if
Security system
is set to
Advanced
.
can be changed only by the System Administrator (User 1).
Reconfigure preset
Passwords are entered initially by the System Administrator but,
subsequently, any user can change their own password. When this
parameter is set to
Yes
, each user must change their password after it is
used for the first time following initial configuration – see also Section
7.7.6, page 76.
Password expiry
Enter the time period after which all passwords expire. After this period of
time, all users must change their passwords.
Inactive user disabling
Enter the time period after which an inactive user's access privileges are
de-activated. A user is considered inactive if their password has not been
used. A user is de-activated by removal of their access privileges and can
be re-activated only by the System Administrator (User 1).
Password failure limit
Enter the number of consecutive incorrect password entries allowed by a
user. If the number of incorrect entries exceeds this limit, the user's
access privileges are de-activated and can be reinstated only by the
System Administrator (User 1).
Min password length
Passwords have a maximum length of 20 characters. Enter the minimum
length required for all new passwords.
