BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
26/74
7
SYSTEM STATUS
To check the status of the central unit and the radio connections:
1.
Log in as a level 2 user
2.
Select Status and events log and press OK
3.
Status Selector
4.
Select Central unit
The following information is displayed on the central unit:
-
Tamper
: OK = tamper off / On
-
Modem
(GSM): - / Not available
-
Battery
: NO = no battery / voltage and battery temperature
-
Network:
Yes / NO
-
Address
: the hexadecimal address of the central unit.
Pressing the > key opens a new window in which the current quality of radio
communications and the occupation of the radio channel (Duty Cycle, should not
exceed 1 el time) are shown in the last 15 minutes, in the last hour and in the last
24 hours. If there is no data, the message "Not available" appears. Pressing the >
key again opens another window in which some information about the GSM is
provided: the type of Modem and the speed, the signal strength in Dbm, the
network registration status and the operator ID code (the operator codes are
listed in standard ITU E.212 )
5.
Select Zones and Sensors: the various zones are displayed and within each zone
information on the status of the programmed sensors is displayed.
6.
System Devices: displays the status of system devices such as Sirens and Repeaters.
7.
Alarm Reset: allows you to remove all the anomalies displayed in the status of both
the system and the sensors if they have been resolved: for example, the operation
clears the notification of "Alarm Mem" but does not remove an anomaly of the type
"ma-nomination" if it remains on the device.
8.
Postponed sync: Displays the list of sensors, if any, on which a change of one or more
radio parameters has been made while waiting for this change to be actually
implemented on the sensor. If the list is not empty, a type symbol appears in the
top right of the display in the rest window.
Status and Events
Log and status
1 Status
2 Critical events
3 Secondary Events
4 SMS
Status
1 Central unit
2 Zones and sensors
3 System devices
4 Alarm reset
5 Sync queued
