![background image](http://html.mh-extra.com/html/abb/sace-tmax-xt5/sace-tmax-xt5_operation-and-maintenance-manual_2240036.webp)
ABB | SACE Tmax XT
34 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
Interface and menus | 4 - Menu
Installation menu
If Ekip Touch detects that
Rating Plug
or
Ekip Measuring
have not been installed properly, it signals an alarm
(page 19) and completes
Settings
menu with the specific installation section:
Menu
Submenus 1
Submenus 2
Commands
Circuit Breaker
Installation
Rating Plug
Install
Ekip Measuring
Install
Correct installation is confirmed by a message on the display and disappearance of the alarm signal and
installation menu.
NOTE:
availability of submenus depends on the module, which appears to have not been
installed
Test Menu
Menu
Submenus
Description, parameters
and Commands
Page
Autotest
-
Autotest command
Trip Test
-
TRIP command
Test CB
-
Close CB
,
Open CB
Ekip CI
-
Autotest command
Ekip Signalling 2K
(1)
Ekip Signalling 2K-1
(1)
Module autotest command
Ekip Signalling 2K-2
(1)
Ekip Signalling 2K-3
(1)
ZoneSelectivity
(2)
S Protection
Input
,
Force Output
,
Release Output
G Protection
(1)
available if one or more Ekip Signalling 2K modules are connected and detected by Ekip Touch
(2)
available if Ekip Touch is on with auxiliary supply
(3)
available with S and/or S2 protection enabled and curve t=k
(4)
available with G and/or Gext protection enabled and curve t=k
About Menu
Menu
Submenus
Information provided
Protection Unit
-
Information about Ekip Touch: Mainboard serial
number, Trip unit serial number, type, version,
standard, SW version, date and time, language
Circuit Breaker
-
CB information: TAG name, CB name, rated current,
number of poles, CB status and position, total
operations, CB serial number
IEC61557-12
(1)
-
Status of 1% measurements (from
Class 1 Power
& Energy Metering
package), serial number of
assembly and current sensors connected
Feature Collection
-
List of tripped protections in Trip unit
Modules
Modul x
(2)
Module information: serial number, SW version,
status of inputs/outputs/contacts (if present)
Power Controller
(3)
Load Input Status
Status of loads (open/closed)
Load Active
Load configuration (activated/not activated)
Load shedding
(3)
Load Input Status
Status of loads (open/closed)
Load Active
Load configuration (activated/not activated)
(1)
available if Class 1 Power & Energy Metering SW package is provided for by Trip unit module or if it has been
previously activated
(2)
available if one or more modules are connected and detected by unit
(3)
available if function has been installed and enabled in Trip unit
Содержание SACE Tmax XT5
Страница 2: ...ABB SACE Tmax XT 2 2019 ABB 1SDH002039A1002 ECN000093027 Rev A ...
Страница 4: ...II 2019 ABB SACE Tmax XT 1SDH002039A1002 ECN000093027 Rev A ...
Страница 204: ...ABB SACE Tmax XT 202 2019 ABB 1SDH002039A1002 ECN000093027 Rev A Other accessories 5 Testing and Programming ...
Страница 205: ...1SDH002039A1002 ECN000093027 Rev A ...