1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 98
Openings [2]
Access to most recent trip
The information relating to the most recent trip, as well as in the
Logs
menu, can be accessed in
three different ways, depending on the Ekip Touch conditions:
Condition
Access
Trip just occurred with
Ekip Touch - access
The main page is temporarily replaced by the trip information
page. Press the
iTEST
button to reset and return to the normal
page
Trip just happened with
Ekip Touch - turned off
Pressing the
iTEST
button shows the trip information page for a
few seconds
Quick consultation in all
other conditions
From any page other than a menu or a page opened from a
menu, press the
iTEST
button four times
Min-Max
measurements
In the
Measurements
-
Logs - Measurements
menu the Ekip Touch records the maximum and
minimum phase currents
The recording interval between one measurement and the next can be set with the parameter
Measurement interval - Measurement interval
, available in the
Settings
menu (page 29).
The
Enter
,
ESC
,
Right/Up
and
Left/Down
buttons can be used to scroll through all recorded
measurements.
Each record is accompanied by the following information:
Phase and value of the measurement
Date and time of the record
NOTES:
If the value is lower than the minimum viewable threshold, the record will show "..."
instead of the value
When the "Measurement interval" parameter is changed, the trip unit immediately
saves a record
Reset measurements
The
Measurement Reset
command to clear all records is found in the
Measurements
-
Logs -
Measurements
menu
Содержание SACE Tmax XT2
