![ABB RELION Series Скачать руководство пользователя страница 73](http://html1.mh-extra.com/html/abb/relion-series/relion-series_technical-manual_3663191073.webp)
The fault-related current, voltage, frequency, angle values, shot pointer and the active
setting group number are taken from the moment of the operate event, or from the
beginning of the fault if only a start event occurs during the fault. The maximum
current value collects the maximum fault currents during the fault. In case frequency
cannot be measured, nominal frequency is used for frequency and zero for Frequency
gradient and validity is set accordingly.
Measuring mode for phase current and residual current values can be selected with the
Measurement mode
setting parameter.
3.7.3
Settings
Table 26:
FLTRFRC Non group settings (Basic)
Parameter
Values (Range)
Unit
Step
Default
Description
Operation
1=on
5=off
1=on
Operation Off / On
Trig mode
0=From all faults
1=From operate
2=From only start
0=From all faults
Triggering mode
Table 27:
FLTRFRC Non group settings (Advanced)
Parameter
Values (Range)
Unit
Step
Default
Description
A measurement mode
1=RMS
2=DFT
3=Peak-to-Peak
2=DFT
Selects used measurement mode phase
currents and residual current
1MRS758755 A
Section 3
Basic functions
REC615 and RER615
67
Technical Manual
Содержание RELION Series
