ABB Relion SAM600-IO, Руководство по протоколу

Страница: 59 / 108

DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC
stVal ST - ModeSt Mon Mode status parameter for 61850
q ST - ModeSt Mon Quality: Mode status parameter
for 61850
t ST - ModeSt Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
RcdMade a_dSPS stVal ST - RECMADE Mon Disturbance recording made
q ST - RECMADE Mon Quality: Disturbance recording
made
t ST - RECMADE Mon Timestamp: Disturbance
recording made
FltNum b_dINS stVal ST - FaultNumber Mon Disturbance fault number
q ST - FaultNumber Mon Quality: Disturbance fault number
t ST - FaultNumber Mon Timestamp: Disturbance fault
number
7.7 Logical nodes for generic references
7.7.1 Generic process I/O GGIO
7.7.1.1 Logic rotating switch for function selection SLGAPC
SEMOD114936-1 v5
PID-6641-LOGICALNODEDATA v2
LN type LN prefix LN class Function block name
SLGGIO (revision 7) SL GGIO SLGAPC
Table 17: SLGAPC Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter
Oper.origin.orCat CO - Mod Cmd Mode parameter
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
Table continues on next page
1MRK 511 440-UEN A
Section 7
Logical node data model
Switchgear control unit SAM600-IO Version 2.2 IEC 53
Communication protocol manual