IEC18000587-IEC18000587-1-en.vsdx
IEC18000587 V1 EN-US
Figure 19: Default values
In this window, the default values common for all bays can be adjusted (the adjustment has a
system global validity). If the entries are made during the initial setfile configuration phase (prior
to the Bay Model engineering under the window single-line diagram), they are active for the
further configuration process.
If the entries are made at a later stage (after the Bay Model engineering phase), the settings have
to be confirmed with Change value of all (group individually).
Of course, these values can also be locally adjusted (individually) for each bay.
7.6
Bay model viewer
GUID-AA831828-522B-4723-A99B-144E75DD01E5 v3
During the configuration phase of the single-line diagram, the user can select pre-configured Bay
). The menu item BM Mode viewer, provides a preview of the available
Bay Models (library).
1MRK 511 452-UUS Rev. A
Section 7
Tools
Distributed busbar protection REB500
39
Engineering manual
© 2020 Hitachi Power Grids. All rights reserved