ABB Relion 670 series, Техническое справочное руководство

Страница: 977 / 1232

15.7.6 Technical data
Table 596: DRPRDRE technical data
Function Range or value Accuracy
Pre-fault time (0.05–9.90) s -
Post-fault time (0.1–10.0) s -
Limit time (0.5–10.0) s -
Maximum number of recordings 100, first in - first out -
Time tagging resolution 1 ms See table 28
Maximum number of analog inputs 30 + 10 (ex internally
derived)
-
Maximum number of binary inputs 96 -
Maximum number of phasors in the Trip
Value recorder per recording
30 -
Maximum number of indications in a
disturbance report
96 -
Maximum number of events in the Event
recording per recording
150 -
Maximum number of events in the
Sequence of events
1000, first in - first out -
Maximum total recording time (3.4 s
recording time and maximum number of
channels, typical value)
340 seconds (100 recordings)
at 50 Hz, 280 seconds (80
recordings) at 60 Hz
-
Sampling rate 1 kHz at 50 Hz
1.2 kHz at 60 Hz
-
Recording bandwidth (5-300) Hz -
15.8 Sequential of events
15.8.1 Introduction
Continuous event-logging is useful for monitoring the system from an overview
perspective and is a complement to specific disturbance recorder functions.
The sequential of events logs all binary input signals connected to the Disturbance
report function. The list may contain up to 1000 time-tagged events stored in a ring-buffer.
15.8.2 Principle of operation
When a binary signal, connected to the disturbance report function, changes status, the
sequential of events function stores input name, status and time in the sequential of
1MRK505222-UUS C
Section 15
Monitoring
971
Technical reference manual