IEC13000284-1-en.vsd
GUID-4F2950E6-5F1F-4B7A-A191-43539B800FAE V1 EN-US
Figure 28: Restoring the previous value
5.1.13.2
Editing string values
AMU0600416 v9
Unicode characters that are not found on the on-screen keyboard can be used
if the string is edited in PCM600. This string can be shown and edited on the
HMI but if a character that is not found on the on-screen keyboard is deleted it
cannot be retrieved using the HMI.
1.
Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
to open the editor.
An on-screen keyboard is shown on the HMI.
IEC15000062.vsdx
IEC15000062 V1 EN-US
Editing can be aborted at any time by pressing
or by using the Cancel button on the
on-screen keyboard.
3.
Press
or
to select the edited string and press
or
to move the cursor.
Section 5
1MRK 500 127-UEN D
Using the HMI
42
670 series
Operation manual
