IEC13000281-1-en.vsd
GUID-C98D972D-D1D8-4734-B419-161DBC0DC97B V1 EN-US
Figure 22: Function button panel
2.
Press the wanted function button.
•
Press the wanted function button to jump to a certain menu item.
The menu opens immediately upon pressing the button.
•
Press the wanted function button for at least 0.5 s to initiate a control signal. The
action is taken once.
To repeat the action, press the button again. If the button is pressed less than 0.5 s,
no action is taken.
3.
Press
to close the function button panel.
The panel is also closed after pressing a function button configured for a menu shortcut.
The function buttons are configured with PCM600.
5.1.11
Using the single-line diagram
GUID-72AC5BD6-D1B5-46D4-83B9-A10870125FCF v7
The single-line diagram is created with PCM600.
1.
Select Main menu/Control/Single line diagram.
The single-line diagram view is displayed.
Section 5
1MRK 500 127-UEN D
Using the HMI
38
670 series
Operation manual
