ABB Relion 670 series, Руководство пользователя

Страница: 189 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
Str b_dACD
t ST - START Mon Timestamp: Start signal of the
protection logic
Op b_dACT general ST T TRIP Mon Operate signal of the protection
logic
q ST T TRIP Mon Quality: Operate signal of the
protection logic
t ST T TRIP Mon Timestamp: Operate signal of the
protection logic
UnbA v2_dMV mag.f MX - IUNBAL Mon Measured unbalance of phase
currents
q MX - IUNBAL Mon Quality: Measured unbalance of
phase currents
t MX - IUNBAL Mon Timestamp: Measured unbalance
of phase currents
StrDur v2_dMV mag.f MX - - Mon Start duration in percents of the
total operating time
q MX - - Mon Quality: Start duration in percents
of the total operating time
t MX - - Mon Timestamp: Start duration in
percents of the total operating time
7.5.13.4 Negative-sequence time overcurrent protection for machines
NS2PTOC
LN type LN prefix LN class Function block name
NS2LLN0 instance 1 (revision 1) - LLN0 NS2PTOC
NS2PTOC instance 1 (revision 1) NS2 PTOC NS2PTOC
NS2PTOC instance 2 (revision 1) NS2 PTOC NS2PTOC
NS2PTRC instance 1 (revision 2) NS2 PTRC NS2PTOC
Table 92: NS2PTOC Logical node data (instance 1)
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter for 61850
Oper.origin.orCat CO - Mod Cmd Mode parameter for 61850
Oper.origin.orIdent CO - Mod Cmd Mode parameter for 61850
Oper.ctlNum CO - Mod Cmd Mode parameter for 61850
Oper.T CO - Mod Cmd Mode parameter for 61850
Oper.Test CO - Mod Cmd Mode parameter for 61850
Oper.Check CO - Mod Cmd Mode parameter for 61850
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
Table continues on next page
1MRK 511 349-UEN -
Section 7
Logical node data model
670 series 2.1 IEC 183
Communication protocol manual