1MRS750527-MUM
)HHGHU7HUPLQDO
Technical Reference Manual, General
5()B
19
1)
These functions are only supported in the feeder terminal revisions of the Release 1.5 or later, refer to
section “Revision identification” on page 90.
2)
These functions are only supported in the feeder terminal revisions of the Release 2.0 or later, refer to
section “Revision identification” on page 90.
3RZHUTXDOLW\IXQFWLRQV
The power quality function blocks are documented on the CD-ROM “Technical
Descriptions of Functions” (1MRS750889-MCD).
1)
These functions are only supported in the feeder terminal revisions of the Release 2.0 or later, refer to
section “Revision identification” on page 90.
&RQWUROIXQFWLRQV
The control functions are used to indicate the status of switching devices, i.e. circuit
breakers and disconnectors, and to execute open and close commands for
controllable switching devices in the switchgear. Furthermore, there are
supplementary functions for control logic purposes, e.g. on/off switches, MIMIC
alarm, LED control, numerical data for the MIMIC and logic controlled position
selection.
The control functions configured using the Relay Configuration Tool can be
associated with object status indicators that are part of the MIMIC configuration
picture displayed on the HMI. Object status indicators are used to indicate the status
MEAI6
2)
General measurement 6 / analogue input on RTD/analogue module
MEAI7
2)
General measurement 7 / analogue input on RTD/analogue module
MEAI8
2)
General measurement 8 / analogue input on RTD/analogue module
MEAO1
2)
Analogue output 1 on RTD/analogue module
MEAO2
2)
Analogue output 2 on RTD/analogue module
MEAO3
2)
Analogue output 3 on RTD/analogue module
MEAO4
2)
Analogue output 4 on RTD/analogue module
MECU1A
Neutral current measurement, stage A
MECU1B
Neutral current measurement, stage B
MECU3A
Three-phase current measurement, stage A
MECU3B
2)
Three-phase current measurement, stage B
MEDREC16
1)
Transient disturbance recorder
MEFR1
System frequency measurement
MEPE7
Three-phase power and energy measurement
MEVO1A
Residual voltage measurement, stage A
MEVO1B
2)
Residual voltage measurement, stage B
MEVO3A
Three-phase voltage measurement, stage A
MEVO3B
2)
Three-phase voltage measurement, stage B
7DEOH 0HDVXUHPHQWIXQFWLRQVDYDLODEOHIRUWKH5()B
)XQFWLRQ
'HVFULSWLRQ
7DEOH 3RZHUTXDOLW\IXQFWLRQVDYDLODEOHIRUWKH5()B
)XQFWLRQ
'HVFULSWLRQ
PQCU3H
1)
Current waveform distortion measurement
PQVO3H
1)
Voltage waveform distortion measurement
