manualshive.com logo in svg

ABB REC 523, Техническое справочное руководство

Поделиться
Скачать
ABB REC 523 Скачать руководство пользователя страница 18

18

1MRS750881-MUM

Remote Monitoring and Control Unit

 

Technical Reference Manual

REC 523

4.2.

Requirements

If the environmental conditions differ from those specified in Chapter 7. Technical 
data, as to temperature and humidity, or if the atmosphere around the unit contains 
chemically active gases or dust, the device should be visually inspected in 
connection with the REC 523 secondary testing. The visual inspection should focus 
on:

• Signs of mechanical damage to device case and terminals.
• Dust inside the device cover or case; remove carefully with compressed air.
• Signs of corrosion on terminals, case or inside the device.

For information about the maintenance of REC 523, refer to Chapter 8. Service.

4.3.

Configuration

The REC 523 units are adapted to specific applications by using the Relay 
Configuration Tool included in CAP 505. The tool is used for configuring the basic 
terminal, protection and logic function blocks, control and measurement functions, 
timers and other functional elements included in the logic functions library. Refer to 
Section 5.8.1. REC 523 configuration.

The configuration of LON network is described in Section 5.8.2. LON network 
configuration. If LON communication is used without LON inputs and outputs 
(network variables), the section about LON network configuration is unnecessary.

The configuration procedure starts by configuring the functions of protection 
control, condition monitoring, measurement and logics with the Relay 
Configuration Tool.

For more detailed information about the configuration, refer to the tool-specific 
manuals (refer to Section 1.8. Related documents).

For the configuration of the remote communication protocols, refer to protocol 
descriptions (refer to Section 1.8. Related documents).

If any ust inside the device cover or case is found, remove it 
carefully with compressed air.

Remote control units are measuring instruments and should be 
handled with care and protected against moisture and mechanical 
stress, especially during transport.

Содержание REC 523































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды